1080P HD COVERT WIFI IP CAMERA IPC0122WP3

Model IPC0122WP3 Image Sensor/Sensor type 1/2.7" CMOS image sensor Effective pixels 1920 (H) x 1080 (V) = 2,073,600 (pixel) Video Compression H.264 , Motion JPEG Resolution 1080P(1920 × 1080), 720P(1280 × 720), D1(720 × 480), CIF(352 × 240) Frame Rates H.264 : up to 30 fps @ 1920 x 1080 , MJPEG : up to 30 fps @ 720 x 480 / H.264 : up to 30 fps @ 1280 x 720 , MJPEG : up to 30 fps @ 352 x 240 / H.264 : up to 30 fps @ 1920 x 1080 , MJPEG : up to 30 fps @ 1280 x 720 / H.264 : up to 30 fps @ 720 x 480 , MJPEG : up to 15 fps @ 1920 x 1080 Lens 3.7 mm (Pinhole) Iris F2.8 Angle of View 100°(H), 56°(V), 114°(D) Video streaming RTP/HTTP, RTP/TCP, RTP/UDP, Multicast Video bitrate 128Kbps – 8Mbps ; Frame rate and bit rate controllable on-the-fly ; VBR / CBR / GOP supported Scanning System Progressive Scan Min. illumination/Low Light Mode (Colour) 1.5 Lux at F2.8 White Balance Auto / Tungsten / Indoor / Fluorescents1 / Fluorescents2 / Outdoor1 / Outdoor2 Back Light Compensation (BLC) Off / On Shutter Time 1/30(1/25)s – 1/8000s Sense Up Off / 1 Frame / 2 Frames / 3 Frames / 7 Frames Sense Up+ Yes Auto Gain Control 36 dB Variable Gain 3D Noise Reduction Off / 1 – 32 Selectable 2D WDR Off / Auto / x2 / x3 / x4 Privacy Masking Off / On (4 zones) Other functions Brightness, Contrast, Hue, Saturation, Sharpness, Mirror, Flip Live video CVBS 1.0Vp-p, 75 ohm, RCA connector Audio Input / Output Mono, 1.98 Vp-p , 3.5mm phone jack Image Sensor Module Input RJ-12 , 6 Pins Encryption Base64 HTTP encryption Access Multiple user access levels with password protection User accounts 10 user accounts available IP address filter Yes Multi IP address Yes Users 8 simultaneous users ePTZ & Digital Zoom Yes, ROI is supported OSD (On-Screen Display) Text overlay for date, time, and camera name Alarm event triggers Audio / motion / tampering detection triggering recording into SD card ; Image upload over FTP and E-mail by tampering / audio / motion detection Alarm event actions Yes CE Yes FCC Yes CPU Embedded SoC ARM11, 528MHz, 256MB DDR2, 256MB flash memor Firmware Firmware update via HTTP / Firmware available at web site WiFi IEEE802.11 b/g/n。RF frequency : 2.4 GHz。Antenna : connector for external antennas。Encryption : 64/128 WEP, TKIP/AES。Authentication: WEP, WPA, WPA2 Network Interface/Ethernet 10Base-T / 100Base-TX, RJ-45 Control interface RS-485 , Half-Duplex , support MLP2 , Pelco D/P protocols Sensing Input Interface/Sensor Input Interface Temperature, humidity, PIR and light intensity reading interfaces (optional) OS requirement Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8 Web browser Windows Internet Explorer 6.0 or above CPU requirement Intel Pentium 4 1.8GHz or above RAM requirement 1GB or above, Independent Display Card Protocols IPv4, IPv6, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ICMP, IGMP, ONVIF Profile S, SNMP, SIP, Bonjour Mobile phone iPhone, iPad, and Android support Video Management ONVIF & LILIN HTTP API ; Navigator Enterprise 1.0 support Video Display LILIN Universal ActiveX & LILIN Java Applet OS Embedded Linux 2.6.32 Audio Two-way Audio , G.711 / PCM SD Card (recording) Support Micro SD/SDHC card for circular recording (card is not included) Alarm Input / output Digital 2 input (TTL, +3 – 5VDC) / 1 Output (Relay dry contact N.O. / N.C. , Load max. 24VDC/1A) Operating temperature -25°C – +50°C (-13°F – 122°F) Dimensions Main module : 130mm(W) x 35mm(H) x 93mm(D) , Image sensor module : Ø25 x 32mm Weight Main module : 310g , Image sensor module : 180g Power Supply DC12V ±10%。 PoE (IEEE 802.3af compliant) PoE PoE Power Consumption DC12V, 6.5W / PoE, 8W